CCcam Installation & Setup (C line & F line)

Posted by blackoutsite@yahoo.com on August 20, 2011 at 2:00 AM

What do you need?

1.  Dreambox Control Center (DCC)

2. CCcam

3. Install CCcam

*Install CCcam on your dreambox

 On most dreambox images you can download and install CCamdirectly from your dreambox . Please refer to your Image help file forinstallation. Youcan also install CCcam manually if you have the necessary expertise. I will leave it up to you! Once you install CCcam set it up as your Default Cam in your dreambox.

4. Install DCC


 DCC is a straightforward setup – proceed with defaultsthroughout the setup

5. Setting up and working with DCC

Open DCC - Update your dreambox IP address, User and Pass

Connect and go down and choose FTP


Choose var/etc, rightclick CCcam.cfg and press edit


6. Adding Servers

(people from whom you are going to get cards) to your CCcam

 So now you are ready to insert servers in CCcam.

You need to set up a line inthe CCcam.cfg we just opened :


The C line will enable you to connect to the server


This is the information you need to set up a basic C line (all the informationis given to you by your friend and will come in this format):

C: cardshare.dyndns.biz 12000 hencha hencha123

1: Your server’s dns ip : cardshare.dyndns.biz

2: Your server’s CCcam Listen Port : 12000

3: Your server’s CCcam User : user1

4: Your server’s CCcam Password : password1

So most of the time you just copy the C line sent by server, and paste it in the CCcam.cfg.


7. Adding a Peer

(people you are going to give cards to) to yourCCcam

If you are sharing it is usually two way. You give your cards and the other person gives you his cards. So you need to allow the server to connect to yourCCcam. You will need to set up an F line to enable your Friend toconnect to your server. This is the information you need to set up a basic F line (you decide all theinformation to set up in this format):



F : user password



Ex :

F : hencha hencha123


Please note that every user needs a different user and password.


Now just put the two lines in the CCcam.cfg file, save and restart CCcam from dreambox.


8. C line for your Peer

 Now you need to give the information in point 7 above to your peer/friend:


1: Your dns ip : cardshare.dyndns.biz

2: Your CCcam Listen Port : 12000

3: Your CCcam User : hencha

4: Your CCcam Password : hencha123

9. Port Forwarding

 Make sure you forward port 12000 to your dreambox ip, and also to allow your dreambox to access the ports given by servers. These are the Basics. There is more to this! But it will get you started!

10. CCcam Basic Tutorial 

Following my Basic CCcam Tutorial, I decided to add some more detail.

A. To exclude known fake and old cards you have to insert this line afterthe password of each single Cline:


no { 0:0:2,100:3, 100:4, 100:5, 100:9, 100:A, 100:c, 100:d, 100:E, 100:f, 100:10, 100:11,100:12, 100:13, 100:14, 100:19, 100:1A, 100:1B, 100:1c, 100:1d, 100:20, 100:21,100:25, 100:26, 100:29, 100:2E, 100:31, 100:33, 100:34, 100:37, 100:64, 100:66,100:67, 100:6b, 100:6d, 100:70, 100:71, 100:72, 100:73, 100:8C, 100:A0, 100:A1,100:A2, 100:A3, 100:100, 100:8227, 100:beef, 100:ffff, 500:80, 500:500,500:1540, 500:1570, 500:2100, 500:2500, 500:4800, 500:5500, 500:7000, 500:7010,500:8000, 500:8800, 500:8c00, 500:8c10, 500:9c00, 500:9C10, 500:9C20, 500:9C30,500:9C40, 500:a000, 500:A800, 500:A810, 500:A820, 500:AC00, 500:B400, 500:C,500:C010, 500:C020, 500:C030, 500:c400, 500:c410, 500:C800, 500:C810, 500:C820,500:C830, 500:C840, 500:C850, 500:C860, 500:C870, 500:D400, 500:D540, 500:D800,500:e400, 500:E410, 500:E430, 500:E440, 500:E450, 500:E470, 500:E800, 500:F000,500:F520, 500:F800, 500:10c00, 500:10c10, 500:10c20, 500:10c30, 500:11000,500:11c00, 500:12000, 500:12010, 500:12800, 500:12810, 500:12C00, 500:13400,500:14400, 500:14800, 500:14880, 500:14C00, 500:15000, 500:16400, 500:16800,500:16810, 500:16C00, 500:16C10, 500:16C20, 500:17000, 500:17010, 500:18c00,500:19000, 500:19400, 500:19410, 500:19420, 500:19430, 500:19440, 500:1a400,500:1ac00, 500:20600, 500:20610, 500:20620, 500:20630, 500:20640, 500:20a10, 500:20a20,500:20a30, 500:20B20, 500:20c00, 500:20c10, 500:20c20, 500:20C30, 500:20C40,500:21510, 500:21570, 500:21c00, 500:21C10, 500:22100, 500:22110, 500:50000,618:0, 924:0, 9A0:0, d00:4, d00:8, d00:14, D00:64, D00:68, d01:50, d01:54,D02:80, D02:88, d02:8c, D03:B0, D03:C0, D03:C4, d03:c8, D04:14, d05:c, d0c:c,d0c:10, d0c:14, d0c:18, 1702:6a, 1800:1, 1800:101, 1800:801, 1800:901,1800:1201, 1800:1301, 1800:1811, 1800:1911, 1800:4001, 1800:4101, 1800:4601,1800:4701, 1800:4801, 1800:4901, 1800:4A01, 1800:4B01, 1800:6E01, 1800:6F01,1800:7001, 1800:7101, 1800:7401, 1800:7501, 1800:9401, 1800:9501, 1800:C001,1800:C101, 1801:7811, 1801:7911, 1802:8C11, 1802:8D11, 4aa0:0 }



* The ‘no

The 'no' means that you will not take EMM(Emu’s) from your peers. CCcam can do its own EMM work if you add a recentAutoroll.key and softcam.key in the var/keys folder. Change to ‘yes’ if you want toreceive peer’s emu.



* The ‘0:0:2

The 0:0:2 means that you will only receive cardsat a Hop 2 from your peers. Just decide how many Hops away you want to receive(1,2,3,4,5)


The rest will eliminate all known old and fake cards from your server.

B. You have to insert the following after the password of each F : line


2 0 0 { 0:0:3 } { } {} change-peer-ip.dns.org


The 2 0 0



* The 2 means that the peer will get all cardsat a maximum of 2 hops away from you.


The first 0 means that the peer gets noemus from you.* Change to 1 to get peer’s emu.


The other 0 means that the peer is notallowed to send us emm. Change to 1 to take peer’s emu. Please note that therehas to be a corresponding entry in the in the server you are sharing with.



* The { 0:0:3 }

The 3 means that the peer can share your cardsdown two further levels beyond his own level. (If you have servers who are notallowing you any reshare, you should change this number to 0 or 1)



* The IP or DNS address at the end of the F line

The IP Address at the end of the F:line makessure that only the specified peer connects to your server. This may prove veryuseful with hackers!



* Restricting shares

If you want to restrict what your peers get, you have to configure your peer'sF line to which you want to block a card in the following manner. The following example restricts Canal+ Digitaal Nederland (19E). You can change to whatevercaid you want:


F: user pass 3 0 1 { 0:0:3, 0100:00006a } { 0100:00006a:07d4, 0100:00006a:07d5} { } change-to-user's-ip


Therefore user will not be allowed to view Canal+ Digitaal Nederland (19E)(0100:00006a) but is allowed to view the following two channels on Canal+Digitaal Nederland (19E): Rtl 4 (0100:00006a:07d4), Rtl 5 (0100:00006a:07d5)

* If you want to allow him to view Canal+ Digitaal Nederland (19E) but not toshare it you have to add a ‘:1’ :

* F: user pass 3 0 1 { 0:0:3, 0100:00006a:1 } { } { } change-to-user's-ip

* The above settings should work well with most servers.

Good Luck!




Categories: CCcam

Post a Comment


Oops, you forgot something.


The words you entered did not match the given text. Please try again.

You must be a member to comment on this page. Sign In or Register